White Rodgers 1F95-71 Operation Manual page 27

cooling period 1 and the currently pro-
grammed HEAT A or HEAT B temperature
for heating/cooling period 1.
EXAMPLE:
This display window shows that for
Monday's heating/cooling period 1, the start
time is 5:00 AM, and 64 is the programmed
temperature (this example reflects factory
preprogramming, where 64 is the HEAT A
temperature).
3. To change the displayed start time to your
selected start time for Monday's period 1,
press TIME or TIME
FWD BACK
displayed. The time will change in 15 minute
increments. The time you program will be
the start time of Monday's period 1 for
both heating and cooling.
until your selected time is
4. If the temperature displayed is not the HEAT
A or HEAT B temperature you want for
Monday's period 1, press
you continue to press
display will alternate between the HEAT A
and HEAT B temperatures you previously
selected).
5. If you want the fan to run continuously
during Monday heating/cooling period 1,
FAN
press until PRG FAN is displayed.
SWITCH
6. After selecting the desired heating tem-
perature for heating/cooling Monday's pe-
riod 1, press
grammed start time and heating tempera-
ture for Monday's heating/cooling period 2
will be displayed.
or
or
. The currently pro-
VIEW
PRGM
(if
, the
27