White Rodgers 1F95-71 Operation Manual page 28

7. Repeat steps 3 through 5 to select the start
time and heating temperature for Monday's
heating/cooling period 2.
8. Repeat steps 3 through 7 for Monday's
heating/cooling periods 3 and 4.
NOTE
The thermostat has a built-in COPY feature.
This feature automatically copies the heating
and cooling programs you select for Monday
into Tuesday through Sunday's programs. If
you want to have the same programming every
day, after you program Monday's schedule,
you simply press RUN
PRGM
programmed operation. Every day will then use
the same program you set for Monday. You
may also choose to use the
28
to start the thermostat's
HOLD button to copy
COPY
any day's heating and cooling program into any
other day's program (see USING THE COPY
BUTTON).
9. To enter Tuesday's through Sunday's heat-
ing programs, use the
below, or press
abbreviation is shown in the display. Re-
peat the above steps to program each day's
heating/cooling periods and heating tem-
peratures.
10. When you have completed programming
your heating/cooling periods and heating
temperatures, press
operation.
HOLD button described
COPY
ADV until the correct day's
DAY
RUN to begin program
PRGM