Entering Your Program; Set Current Time And Day - White Rodgers 1F95-71 Operation Manual

ENTERING YOUR PROGRAM

Follow these steps to enter the heating/cooling
program you have selected.
NOTE
We recommend that you remove the thermo-
stat from the wall for programming (especially
for entering cooling programming). A fresh 9
®
volt Energizer alkaline battery must be in-
stalled to perform off-wall programming. BE
SURE SYSTEM SWITCH IS SET TO OFF
POSITION BEFORE
THERMOSTAT TO SUBBASE!
You cannot program the thermostat with the
SYSTEM SWITCH in the AUTO position.
24
REATTACHING

Set Current Time and Day

1. Press SET once. The display will show
CLOCK
minutes only.
EXAMPLE:
2. Press and hold either
reach the correct minutes.
3. Press SET once. The display window will
CLOCK
show the hour only.
EXAMPLE:
4. Press and hold either
reach the correct hour and AM/PM desig-
nation (AM begins at midnight; PM begins
at noon).
TIME or TIME until you
FWD BACK
TIME or TIME until you
FWD BACK