Installation; Turn Off Water Supply; Install Brine Tank Overflow Elbow - Whirlpool WHES20 Installation And Operation Manual

Turn Off Water Supply

Install the Brine Tank Overflow Elbow
12

Installation

1. Close the main water supply valve, near the well pump or water meter.
2. Open all faucets to drain all water from the house pipes.
Be sure not to drain water from the water heater, as damage to the water heater
NOTE:
elements could result.
Install the brine tank overflow grommet and elbow in the 13/16" diameter hole in the back of the salt
storage tank sidewall.
The salt storage tank drain elbow accepts either 1/2" or 3/8" I. D. hose.
NOTE:
Nozzle venturi assembly
Nut---ferrule
Salt hole cover
Brine tubing
Salt storage tank
Stand tube
Top cover
Brine tank overflow elbow
Figure 6
Brine tank overflow
grommet
13/16" hole
Brinewell cover
Brinewell
Float stem
Brine valve