Solid-State Drives 3 And 4 - HP ZBook Fury 17 G7 Maintenance And Service Manual

1. Prepare the computer for disassembly
2. Remove the service cover
WARNING!
computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
IMPORTANT:
To prevent loss of information, save your work or shut down the computer through Windows before you remove
the battery.
Remove the battery:
1. Slide the battery latches (1) to the left to unlock the battery.
2. Use the tab (2) to swing the battery rear edge (3) up and forward until it rests at an angle.
3. Remove the battery (4) from the computer.
To insert the battery, reverse the removal procedures.

Solid-state drives 3 and 4

To remove solid-state drives 3 and 4, use this procedure and illustration.
Table 5-3 Solid-state drive description and part number
Description
1 TB, M.2 2280, PCIe, NVMe-3×4, SS with TLC
512 GB, M.2 2280, PCIe-3×4, SS with TLC
512 GB, M.2 2280, PCIe, NVMe, SED with TLC
42 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
(Service cover on page
To reduce potential safety issues, use only the user-replaceable battery provided with the
Removing a battery that is the sole power source for the computer can cause loss of information.
(Preparation for disassembly on page
40).
66).
Spare part number
L85348-001
L85360-001
L85368-002
ENWW