Table of Contents
Advertisement
Setup of the massage lounger
1
Before use (installation position)
Keep the product 20 cm from the wall.
Approx. 30 cm
Mat
Do not expose the product to direct sunlight or a high-temperature place (e.g., in front of heating equipment); otherwise its
●
synthetic leather may fade or harden.
Place a mat below the product to avoid floor damage. The mat should cover the product' s area in contact with the floor and
●
the Leg/Foot massage section area in contact with the floor (minimum dimensions: 120 cm×80 cm). See the figure.
Install the product close to a power socket.
●
2
Make sure both main body and accessories of the product
are in the packing box
Main unit
Remote controller
EN12
Approx. 195 cm
Product's are in contact with the floor
Accessories
Make sure there is enough space for
the tilting of the product.
See EN40 for dimensions of the product.
●
Back cushion
●
Power line
●
Remote controller holder
●
Safety lock key
●
Installed on the main
body when delivered
Advertisement
Chapters
Table of Contents
