Panasonic EP-MA32 Operating Instructions Manual page 55

3
Connect the power supply and raise the backrest
Do not put the back cushion between the backrest and
the back cover or handle the product when holding its
window frame. Make sure there is no foreign matter
between the backrest and the back cover.
❶
Insert the power plug into the power socket.
Use an AC 220 V 50 Hz power socket.
●
❷
Make sure the safety lock switch is in the
"open" position.
❸
Make sure the power switch is in the "on" position.
❹
Press
controller to raise the backrest.
The second pressing should be done about one second
●
after the first pressing. After that, the backrest will be raised
automatically.
4
Install the Remote Controller Into the Holder
❶
Insert the Remote Controller at a
slanted angle toward the bottom of
the holder.
❷
Press the Remote Controller into the
holder until you hear a click, indicating
that the protrusions are firmly inserted
into the holder's indentations.
❸
To Remove the Remote Controller,
Push the Remote Controller upward
out of its holder.
5
Fix the back cushion
❶
Fix the back cushion by the
zipper.
❷
Fix the flounce at rear of the
back cushion by the hasp.
twice the button on the remote
❶
Indentations
❶
❷ ❷
❷
Protrusions
Zipper
❸ ❸
❸
Back cushion
Buckle
EN15