Cleaning and maintenance
Wipe the synthetic leather with a
soft dry cloth.
Do not clean the product with chemicals such as thinners,
●
gasoline and alcohol.
When using a leather maintenance product (cleaning cloth)
●
sold on the market, follow its directions for use.
If the synthetic leather is very dirty, wipe it with the method
●
below.
① Put a piece of soft cloth into water or 3 % to 5 % neutral
detergent contained hot water and wring it out.
② Wipe surface of the synthetic leather with the soft cloth.
③ Wipe the detergent with a piece of cloth once soaked in
clean water and wrung out.
④ Wipe with a piece of wrung soft cloth.
⑤ Have the synthetic leather take natural air drying.
If it is difficult to remove the stains on the synthetic leather,
●
soak a piece of melamine foam bought from the market
into a neutral detergent and use it wipe the product.
Do not dry the surface by a hair drier.
●
Surface of the synthetic leather may be dyed by fabric
●
colors; therefore, be careful when wiping the product with
denim or colored cloth.
Keep these positions from long-time contact with plastics to
●
avoid fading.
Synthetic leather may discolor, so the position in contact
●
with the hair dye used should be covered by a towel.
❶
Put a piece of soft cloth into
water or neutral detergent
contained hot water, wring it
out and wipe the plastic parts.
Do not clean the product with chemicals such as
●
thinners, gasoline and alcohol.
❷
Wipe with a piece of cloth
once soaked in clean water
and wrung out.
Wring the cloth out before using it to wipe the remote
●
controller.
❸
Have the plastic parts take
natural air drying.
EN34
Cleaning of the synthetic leather
Cleaning of the plastic parts
water
mild detergent
water
mild detergent