Assembly
1
Install the remote controller holder on right side of the
product
2
Connect the product with the power line
Power line
EN14
Power input jack
Interface
Power box
Install the remote controller holder and
put the remote controller into it.
❶
Insert the remote controller holder into
the remote controller stand till the end.
❷
Fix with the remote controller holder
retaining screw.
❸
Put the remote controller into the remote
controller holder.
❶
Inspect whether the power input jack and
the power line interface of the power box
are contaminated or damaged.
❷
Insert the interface into the power input
jack.
❸
Insert the interface till the end.