Data Set Routing - Siemens SIMATIC PCS 7 CPU 410-5H System Manual

Reference
● Further information on configuration with STEP 7 can be found in Manual Configuring
hardware and communication connections with STEP 7
(http://support.automation.siemens.com/WW/view/en/45531110).
● More basic information is available in Manual Communication with SIMATIC
(http://support.automation.siemens.com/WW/view/en/1254686).
● For more information about the TeleService adapter, refer to Manual TS Adapter
(http://support.automation.siemens.com/WW/view/en/20983182)
● For additional information about SFCs, refer to the Instructions list.
(http://support.automation.siemens.com/WW/view/en/44395684)
For a detailed description, refer to the
Standard Functions
(http://support.automation.siemens.com/WW/view/de/44240604/0/en).
15.6.6

Data set routing

Routing and data set routing
Routing is the transfer of data beyond network boundaries. You can send information from a
transmitter to a receiver across several networks.
Data set routing is an expansion of S7 routing and is used, for example, in SIMATIC PDM.
The data sent through data record routing include the parameter assignments of the
participating communication devices and device-specific information (for example, setpoint
values, limit values, etc.). The structure of the destination address for data set routing
depends on the data content, in other words, it is determined by the device for which the
data is intended.
The field device itself does not have to support data set routing, since these devices do not
forward the received information.
CPU 410-5H Process Automation
System Manual, 09/2014, A5E31622160-AB
15.6 Communication services
STEP 7 online help
or Manual System and
Supplementary information
249