A.O. Smith ITES Series Installation, User And Service Manual page 74

3.6.9 Connecting remote display
The Remote Display (Smart Display) is a large display that visualizes data from the solar
system. On display are the temperatures, in the collector and the water heater, and the
output of the solar system is displayed
Place the display on the required place and connected the display to the control via a
2
2-wire cable (0.7 mm ). Connect these wires to terminals 13 and 14.
Note
2
This 0.7 mm cable is not supplied by A.O. Smith.
Important
The maximum length of this cable is a 100 meter. When this length is exceeded data can
be lost.
Installation-, user and service manual
72