Fig. 4-120 Jam Stop Group Main Components; Fig. 4-121 Jam Stop Group Operation (A) - Canon NP-70 Service Manual

NP•70
4-103
4) JAM STOP GROUP
Actuator Trip
Lever
Reset Button
Reset Button Arm
Ass'y Main Plate
Trip Release Lever
Fig. 4-120 Jam Stop Group Main Components
When a paper jam occurs, these components operate to stop copying as follows (reference-
Chapter 3—Jam Detection Circuit):
a) Normally the stud of the trip release lever is in the notch of the actuation trip lever, as
shown in Fig. 4121. In this case the reset button is held down but under spring tension.
b) Since the reset button is at its lower position, the actuator trip lever is pressing MS6A &
6B to their ON position and power is being supplied to the copier.
Stud of Trip
Release Lever
Reset Button
Reset Button Arm
Trip
Release Lever
Actuator Trip Lever
Fig. 4-121 Jam Stop Group Operation (AJ
Ass'y Main Plate
© CANON INC.
Second Printing,lune, 1974