Canon NP-70 Service Manual page 212

4-112
NP -70
4) COPYBOARD WIRE
The Copyboard wire is used to draw the Copyboard back and forth for exposure of the origi-
nal. The wire is dual-ended with each end attached to the Copyboard; one end draws the
Copyboard forward, while the other end draws the Copyboard in the return direction. (for
additional information section 4.1, Copyboard Assembly).
4.17-3
REMOVAL/INSTALLATION ACTIONS
The replacement procedures used for the Copyboard wire are included in section 4.1, Copy-
board Assembly.
4.17-4 REPAIR/SERVICING ACTIONS
Adjustment procedures for the Copyboard wire are included in section 4.1, Copyboard
Assembly.
Second Printing,lune, 1974
© CANON INC.