Shutdown & Cleaning - Jackson RackStar Series Installation, Operation & Service Manual

Conveyor dischmachines
Table of Contents

Advertisement

OPERATION
SHUTDOWN &
CLEANING
!
WARNING
Self-cleaning arms do not
require daily cleaning.
07610-004-33-05-E
1. Turn machine off by pressing the Power Button.
2. Open access door and allow steam/heat to escape.
3. Turn drain handle to "OPEN" and allow tub to drain.
WARNING! Wash tank water will be hot.
4. Remove the strainers, hand-scrape foodsoil into trash, and spray with pre-rinse hose.
5. Rinse the float switch off, rinse the tank out, and inspect tank for debris.
6. Remove curtains, scrub with mild detergent and brush, and allow to air-dry.
7. Wash & Rinse Arms:
a. As needed, fill the tub with water.
b. Remove the end-caps from the arms.
c. Run an empty rack through the machine.
d. If necessary:
i. Clean nozzles with a brush.
ii. Use a small wire or toothpick to remove remaining
iii. Flush the arms with water.
iv. Replace end-caps and ensure they have
OPERATING INSTRUCTIONS
debris or lime deposits from the nozzles.
been tightened.
28

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents