Commissioning, Inspec-Steps - Commissioning, Inspection And Maintenance - Viessmann VITOSOL-F Service Instructions Manual

Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance
Commissioning steps
Inspection steps
Maintenance steps
•
1. Checking pressure conditions, adjusting the expansion vessel pre-charge pressure
if necessary...........................................................................................................................
• • •
2. Checking the function of the safety equipment................................................................
• • •
3. Checking the electrical connections..................................................................................
•
4. Filling, flushing and checking the solar thermal system for leaks..................................
• • •
5. Determining the flow rate and adjusting it if required...................................................... 10
• •
6. Performing a test flush........................................................................................................ 11
• •
7. Commissioning the system................................................................................................. 11
• • •
8. Checking the switching function of the solar control unit............................................... 11
• •
9. Checking and replacing the heat transfer medium if required........................................ 12
6
Page
7
8
8
8