Commissioning, Inspection, Maintenance; Steps - Commissioning, Inspection And Maintenance - Viessmann Vitosol 200-T Service Instructions For Contractors

Steps - commissioning, inspection and maintenance

For further information regarding the individual steps, see the page indicated
•
• • •
• • •
• • •
• •
• •
• • •
• • •
•
• •
• •
• •
• •
•
Commissioning steps
Inspection steps
Maintenance steps
1. Cleaning, testing for leaks and filling the solar thermal
system.............................................................................
2. Checking the function of the safety equipment
3. Checking the expansion vessel and the system
pressure...........................................................................
4. Checking the electrical connections............................
5. Starting the heating system...........................................
6. Ventilating the solar thermal system............................
7. Checking the switching function of the solar control
unit................................................................................... 10
8. Checking the flow rate
9. Shutting down the system............................................. 10
10. Checking gaskets and seals
11. Checking the frost protection temperature and the pH
value of the heat transfer medium................................ 10
12. Checking the thermal insulation of the pipes.............. 10
13. Checking circulation pumps
14. Cleaning collectors

Commissioning, inspection, maintenance

Page
6
7
7
7
8
5