Commissioning, Inspection, Maintenance; Steps - Commissioning, Inspection And Maintenance - Viessmann Vitosol-T Service Instructions Manual

Steps - commissioning, inspection and maintenance

For further information regarding the individual steps, see the page indicated
Commissioning steps
Inspection steps
Maintenance steps
•
1. Checking pressure conditions and pre-charge
pressure.............................................................................
• • •
2. Checking the function of the safety equipment.............
• • •
3. Check electrical connections..........................................
•
4. Flushing, testing for leaks and filling the solar thermal
system...............................................................................
• • •
5. Determining the flow rate and adjusting if required...... 11
• •
6. Starting the system.......................................................... 12
• • •
7. Checking the switching function of the solar control
unit..................................................................................... 12
• •
8. Checking heat transfer medium and replacing if
required............................................................................. 12

Commissioning, inspection, maintenance

Page
6
7
7
8
5