Certificates Declaration Of Conformity - Viessmann VITOSOL-F Service Instructions Manual

Certificates
Declaration of conformity
Vitosol-F/-FM
We, Viessmann Werke GmbH & Co. KG, D-35107 Allendorf, declare as sole responsible body that the named
product complies with the provisions of the following directives and regulations:
2014/35/EU Low Voltage Directive
2014/30/EU EMC Directive
2014/68/EU Pressure Equipment Directive
2009/125/EC Ecodesign Directive
813/2013 EU Regulation "Energy Efficiency Requirements"
Applied standards:
EN 1991-1-1: 2002 + AC: 2009
EN 1991-1-3: 2003
EN 04/01/1991: 2005
EN 12975-1: 2006 + A1: 2010 or ISO 9806: 2013 to Solar-KEYMARK
In accordance with the listed directives, this product is designated with
Details according to the Pressure Equipment Directive:
Heated pressure vessel
■
Class I according to appendix II, diagram 5
■
Module A according to appendix III
■
The pressure vessel was tested without fitted equipment (safety equipment).
The pressure vessel must be equipped in accordance with current national regulations prior to installation and
commissioning.
For the energy assessment of heating and ventilation equipment to DIN V 4701-10 as required by the EnEV,
when determining system values for the product Vitosol, the product characteristics calculated as part of output
testing can be used (see specification table).
Allendorf, 1 August 2016
22
Viessmann Werke GmbH & Co. KG
Authorised signatory Manfred Sommer
.