Commissioning, Inspection, Maintenance; Steps - Commissioning, Inspection And Maintenance - Viessmann VITOSOL 100-F Service Instructions Manual

Steps - commissioning, inspection and maintenance

For further information regarding the individual steps, see the page indicated
•
• • •
• • •
•
• • •
• •
• • •
• •
Commissioning steps
Inspection steps
Maintenance steps
1. Checking pressure conditions and adjusting the pre-
charge pressure of the expansion vessel if necessary
2. Checking the function of the safety equipment.............
3. Checking electrical connections.....................................
4. Filling and flushing the solar thermal system and
checking for leaks............................................................
5. Determining the flow rate and adjusting if required...... 11
6. Commissioning the system............................................. 12
7. Checking the switching function of the solar control
unit..................................................................................... 12
8. Checking and replacing the heat transfer medium if
required............................................................................. 13

Commissioning, inspection, maintenance

Page
6
8
8
8
5