Channelspecific Machine Data - Siemens SINUMERIK 840D sl Function Manual

Data lists
5.1 Machine data
5.1.2

Channelspecific machine data

Number Identifier: $MC_
20096 T_M_ADDRESS_EXT_IS_SPINO
20110 RESET_MODE_MASK
20120 TOOL_RESET_VALUE
20121 TOOL_PRESEL_RESET_VALUE
20126 TOOL_CARRIER_RESET_VALUE
20130 CUTTING_EDGE_RESET_VALUE
20132 SUMCORR_RESET_VALUE
20140 TRAFO_RESET_VALUE
20180 TOCARR_ROT_ANGLE_INCR[i]
20182 TOCARR_ROT_ANGLE_OFFSET[i]
20184 TOCARR_BASE_FRAME_NUMBER
20188 TOCARR_FINE_LIM_LIN
20190 TOCARR_FINE_LIM_ROT
20202 WAB_MAXNUM_DUMMY_BLOCKS
20204 WAB_CLEARANCE_TOLERANCE
20210 CUTCOM_CORNER_LIMIT
20220 CUTCOM_MAX_DISC
20230 CUTCOM_CURVE_INSERT_LIMIT
20240 CUTCOM_MAXNUM_CHECK_BLOCKS
20250 CUTCOM_MAXNUM_DUMMY_BLOCKS
200
Description
Spindle number as address extension
Definition of control basic setting after powerup and
RESET parts program end
Definition of tool, for which tool length compensation
is selected during powerup or on reset or parts
program end as a function of machine data:
MD20110 RESET_MODE-MASK.
Definition of the preselected tool, for which the tool
length compensation is selected during powerup and
on reset or parts program end as a function of
MD20110.
Active toolholder on RESET
Definition of tool cutting edge, for which tool length
compensation is selected during powerup or on reset
or parts program end as a function of machine data:
MD20110 RESET_MODE-MASK.
Number for selecting sum offset
Definition of transformation set, which is selected
during powerup or on reset or parts program end as a
function of machine data:
MD20110 RESET_MODE-MASK.
Value of the minimum incremental step with toolholder
with orientation capability
Offset of the rotary axis with toolholder with
orientation capability
Base frame of the table offset for toolholder with
orientation capability with rotary table
Limit linear fine offset TCARR
Limit rotary fine offset TCARR
Maximum number of blocks with no traversing
motions with SAR
Max. angle for intersection calculation with tool radius
compensation
Maximum value for tool radius compensation
Minimum value for intersection calculation with tool
radius compensation
Blocks for predictive contour calculation with tool
radius compensation
Max. no. of dummy blocks with no traversing
movements
Basic logic functions: Tool Offset (W1)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0