About this task
The following images indicate the location of the keyboard and provide a visual representation of the installation procedure.
Steps
1. Align the and place the keyboard into its slot in the palmrest assembly.
2. Replace the nineteen (M1.6x2) screws securing the keyboard to the palmrest assembly.
Next steps
If you are replacing a component, remove the existing component before performing the installation procedure.
1. Install the:
a.
System board
b.
Heatsink assembly
c.
Solid state drive
d.
Battery
e.
Base cover
2. Follow the procedure in
Palmrest assembly
Removing and Installing the Palmrest assembly
Prerequisites
1. Follow the procedure in
2. Remove the:
a.
Base cover
b.
Battery
c.
Solid state drive
54
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.