Steps
1. Place the heatsink assembly into the slot in the system board and replaced the five (M2x2.5) screws to secure it to the system board.
2. Reconnect the fan cable to the connector on the system board.
3. Place the WLAN bracket onto the WLAN antennas and replace the single (M2x2.5) screw that secures the shield plate to te system
board
NOTE:
The fan cable must be routed under the shield plate.
Next steps
1. Reconnect the
battery
2. Install the
base
cover.
3. Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
cable.
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
39