Speakers; Removing The Speaker - Dell Latitude 7410 Chromebook Enterprise Service Manual

Steps
1. Align and place the display assembly onto the system chassis and fold the hinges inwards.
2. Fold the left hinge back and install the two (M2.5x5) screws to secure it to the chassis.
3. Fold the right hinge back and install the two (M2.5x5) screws to secure it to the chassis.
4. Connect the eDP and camera cable to the connectors on the system board.
5. Place the eDP bracket onto the eDP cable and secure it to the system board by installing the two (M2x2) screws.
6. Route the WWAN antenna cables though the routing points provided and connect them to the WWAN card.
7. Place the WWAN bracket on to the antennas and install the single (M2x2.5) screw.
Next steps
1. Reconnect the battery
2. Install the base cover.
3. Follow the procedure in

Speakers

Removing the speaker

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
About this task
The following images indicate the location of the speaker and provide a visual representation of the removal procedure.
cable.
After working inside your computer.
Before working inside your computer.
Disassembly and reassembly 43