Advertisement
Available languages
Available languages
Using the pole vac reach wand
The reach wand can be used for hard to reach places.
Press the Powered
Head/accessory release
clip and pull to remove
the Powered Head from
the reach wand.
To switch the vacuum
on, press the on/off
button located on the
back of the handle.
The reach wand can be used for hard to reach
places and at different heights for above floor
cleaning.
Choose an accessory
(pictures illustrated
depending on model).
When the vacuum is switched on, the boost on/off
button will also illuminate, confirming that the boost
mode is 'On'. The vacuum will always start
in boost mode. Pressing the boost button will
deactivate/activate the boost mode.
OPERATION
Push the chosen
accessory into the
reach wand until it
clicks into place.
The vacuum is not free standing
and in between uses must always
be placed in the wall bracket, or
laid flat on the floor in a suitable
location, so that it does not become
a trip hazard or can be stepped on.
8
Advertisement
