Advertisement
Available languages
Available languages
Cleaning the filters and separator
CAUTION: Always remove the reach wand/accessories from the handheld and empty the dirt
container before cleaning the filters and separator. DO NOT use the vacuum without both the filters in
place. For best cleaning results, the filters should be tapped over a bin every 4-6 uses to remove dirt
and debris and washed every 3 months depending on the level of use.
Cleaning the filter
Press the handheld
release clip. Pull and
remove the reach
wand or the accessory
that is attached to the
handheld.
Pull the tab on the filter to remove from the cover.
Wash the filter under
running water
(40°C max).
Twist the filter cover
anticlockwise to unlock.
24hr
24hr
Leave for 24hrs or until
fully dry before replacing.
MAINTENANCE
Pull and remove the
filter cover from the
handheld.
Tap the filter over a bin
to remove any dirt/
debris.
12
Advertisement
