Hoover BLADE TBT3V3B1 User Manual page 14

MAINTENANCE
13
Cleaning the separator and foam filter
Press the handheld
release clip. Pull and
remove the reach
wand or the accessory
that is attached to the
handheld.
Twist the separator
anticlockwise to unlock
and pull to remove.
Leave for 24hrs or until
fully dry before refitting
the filter back into the
vacuum.
Hold the handheld over a bin and press the dirt
release button to allow dirt/debris to fall out.
Pinch the round foam
filter inside the top of
the separator and pull
to remove. Tap both
parts over a bin to
remove dirt/debris.
24hr 24hr
Wash the foam filter and
the separator under running
water (40°C max).