Advertisement
Available languages
Available languages
OPERATION
9
Using the pole vacuum as a handheld
NOTE: The vacuum has a constantly rotating brushbar when activated. Never leave the vacuum
in one spot for an extended period of time as this may damage the floor surface. Always turn the
brushbar off when cleaning hard floors. The brushbar should be ON for carpets and OFF for hard
floors. To prevent any damage being sustained test on an inconspicuous area of the flooring. Always
take extra care when using the vacuum on the stairs.
Press the handheld
release clip. Pull to
separate the handheld
from the reach wand.
Push the chosen
accessory into the
handheld until it is
securely locked into
place.
The reach wand, when
attached to the Powered
Head/accessory, is not
free standing. Place
safely and securely to
one side.
All of the accessories,
including the Powered
Head, can be attached
directly onto the
handheld.
Choose an accessory
(pictures illustrated
depending on model).
To switch the vacuum on, press
the on/off button located on the
back of the handle. The battery
level indicator light on the handle
and battery charging light will
illuminate white.
Advertisement
