Advertisement
Available languages
Available languages
Fixing the wall bracket
Fully assemble the
vacuum but do not
attach the battery.
Choose a location for
the vacuum to be stored,
preferably near to a
mains supply. Stand the
vacuum in the upright
position against the
wall, with the Powered
Head flat on the floor.
Use the screws and wall
plugs to secure the wall
bracket to the wall.
Line up the wall bracket with the back of the
handheld. Slot the bracket into the handheld and
push upwards to lock into place.
Using a pencil, make
a mark to show the
required position of
the wall bracket. Lift
to remove the vacuum
from the wall bracket.
Store the vacuum on the wall bracket by
lifting it up slightly above the bracket and
sliding the back of the handheld down and
onto the bracket. Always ensure the vacuum
is securely locked into place.
OPERATION
Align the bracket back
to the wall and make an
additional 3 small marks
for each screw.
4
Advertisement
