Cisco WLC 5700 Series Command Reference Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Switch
  5. WLC 5700 Series
  6. Command reference manual
Cisco WLC 5700 Series Command Reference Manual

Cisco WLC 5700 Series Command Reference Manual

Layer 2/3, cisco ios xe release 3e
Hide thumbs Also See for WLC 5700 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC
5700 Series)
First Published: June 16, 2014
Last Modified: 0,
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-32323-01

Advertisement

Table of Contents
loading

Related Manuals for Cisco WLC 5700 Series

Summary of Contents for Cisco WLC 5700 Series

  • Page 1 Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) First Published: June 16, 2014 Last Modified: 0, Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387)
  • Page 2 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.

  • Page 3: Table Of Contents

    Searching and Filtering Output of show and more Commands Accessing the CLI Accessing the CLI through a Console Connection or through Telnet Layer 2/3 Commands C H A P T E R 2 channel-group Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 4 Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 5: P R E F A C E Preface

    A vertical line, called a pipe, indicates a choice within a set of keywords or arguments. [x | y] Optional alternative keywords are grouped in brackets and separated by vertical bars. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 6 Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 7: Related Documentation

    Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html...
  • Page 8 Preface Obtaining Documentation and Submitting a Service Request Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) viii OL-32323-01...

  • Page 9: Using The Command-Line Interface

    Using the Command-Line Interface, page 1 Using the Command-Line Interface This chapter describes the Cisco IOS command-line interface (CLI) and how to use it to configure your switch. Understanding Command Modes The Cisco IOS user interface is divided into many different modes. The commands available to you depend on which mode you are currently in.
  • Page 10 (with a Ethernet ports. To return to specific interface). privileged EXEC mode, press Ctrl-Z or enter end. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 11: Understanding The Help System

    ? Lists the associated arguments for a keyword. Controller(config)# cdp holdtime ? <10-255> Length of time (in sec) that receiver must keep this packet Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 12: Understanding Abbreviated Commands

    The caret (^) marks the all the commands that are available point of the error. in this command mode. The possible keywords that you can enter with the command appear. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 13: Using Configuration Logging

    To recall commands from the history buffer, perform one of the actions listed in this table. These actions are optional. The arrow keys function only on ANSI-compatible terminals such as VT100s. Note Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 14: Disabling The Command History Feature

    To re-enable the enhanced editing mode for the current terminal session, enter this command in privileged EXEC mode: Controller# terminal editing To reconfigure a specific line to have enhanced editing mode, enter this command in line configuration mode: Controller(config-line)# editing Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 15: Editing Commands Through Keystrokes

    Delete entries if you make a Press the Delete or Backspace key. Erases the character to the left of mistake or change your mind. the cursor. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 16 Scrolls down one screen. Redisplay the current command Press Ctrl-L or Ctrl-R. Redisplays the current command line if the switch suddenly sends a line. message to your screen. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 17: Editing Command Lines That Wrap

    Vlan1 is up, line protocol is up Vlan10 is up, line protocol is down GigabitEthernet1/0/1 is up, line protocol is down GigabitEthernet1/0/2 is up, line protocol is up Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 18: Accessing The Cli

    After you connect through the console port, through the Ethernet management port, through a Telnet session or through an SSH session, the user EXEC prompt appears on the management station. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 19: Layer 2/3 Commands

    47 • show pagp, page 52 • show platform etherchannel, page 54 • show platform pm, page 55 • show udld, page 56 Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 20 62 • switchport mode, page 63 • switchport nonegotiate, page 66 • udld, page 68 • udld port, page 70 • udld reset, page 72 Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 21: Channel-Group

    You do not have to use the interface port-channel command in global configuration mode to manually create a port-channel interface. If you create the port-channel Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 22 Do not configure a secure port as part of an EtherChannel or configure an EtherChannel port as a secure port. For a complete list of configuration guidelines, see the “Configuring EtherChannels” chapter in the software configuration guide for this release. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 23 Accesses or creates a port channel. interface port-channel Displays EtherChannel information for a channel. show etherchannel Displays LACP channel-group information. show lacp Displays Port Aggregation Protocol (PAgP) channel-group show pagp information. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 24: Channel-Protocol

    This example shows how to specify LACP as the protocol that manages the EtherChannel: Controller(config-if)# channel-protocol lacp You can verify your settings by entering the show etherchannel [channel-group-number] protocol privileged EXEC command. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 25 Command Description Assigns an Ethernet port to an EtherChannel group, or enables an channel-group EtherChannel mode, or both. Displays EtherChannel information for a channel. show etherchannel Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 26: Clear Lacp

    You can verify that the information was deleted by entering the show lacp counters or the show lacp channel-group-number counters privileged EXEC command. Related Commands Command Description Displays LACP channel-group information. show lacp Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 27: Clear Pagp

    You can verify that the information was deleted by entering the show pagp privileged EXEC command. Related Commands Command Description Enables debugging of PAgP. debug pagp Displays Port Aggregation Protocol (PAgP) channel-group information. show pagp Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 28: Debug Etherchannel

    To enable debugging on the standby controller without first starting a session on the active controller, use the remote command switch-number LINE command in privileged EXEC mode. Examples This example shows how to display all EtherChannel debug messages: Controller# debug etherchannel all Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 29 This example shows how to display debug messages related to EtherChannel events: Controller# debug etherchannel event Related Commands Command Description Displays EtherChannel information for a channel. show etherchannel Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 30: Debug Lacp

    This example shows how to display all LACP debug messages: Controller# debug LACP all This example shows how to display debug messages related to LACP events: Controller# debug LACP event Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 31: Debug Pagp

    To enable debugging on the standby controller without first starting a session on the active controller, use the remote command switch-number LINE command in privileged EXEC mode. Examples This example shows how to display all PAgP debug messages: Controller# debug pagp all Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 32 Layer 2/3 Commands debug pagp This example shows how to display debug messages related to PAgP events: Controller# debug pagp event Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 33: Debug Platform Pm

    LINE command in privileged EXEC mode. Examples This example shows how to display debug messages related to the creation and deletion of VLANs: Controller# debug platform pm vlans Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 34: Debug Platform Udld

    Modification Cisco IOS XE 3.2SE This command was introduced. Usage Guidelines The undebug platform udld command is the same as the no debug platform udld command. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 35: Interface Port-Channel

    Do not assign bridge groups on the physical ports in a channel group used as a Layer 3 port channel Caution interface because it creates loops. You must also disable spanning tree. Follow these guidelines when you use the interface port-channel command: Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 36 Layer 2/3 Commands interface port-channel • If you want to use the Cisco Discovery Protocol (CDP), you must configure it on the physical port and not on the port channel interface. • Do not configure a port that is an active member of an EtherChannel as an IEEE 802.1x port. If IEEE 802.1x is enabled on a not-yet active port of an EtherChannel, the port does not join the EtherChannel.

  • Page 37: Lacp Max-Bundle

    Specifies the minimum number of LACP ports that must be in the link-up port-channel min-links state and bundled in the EtherChannel in order for the port channel to become active. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 38: Lacp Port-Priority

    Use the show lacp internal privileged EXEC command to display LACP port priorities and internal port number values. For information about configuring LACP on physical ports, see the configuration guide for this release. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 39 Assigns an Ethernet port to an EtherChannel group, or enables an channel-group EtherChannel mode, or both. Configures the LACP system priority. lacp system-priority Displays LACP channel-group information. show lacp Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 40: Lacp System-Priority

    This example shows how to set the LACP system priority: Controller(config)# lacp system-priority 20000 You can verify your settings by entering the show lacp sys-id privileged EXEC command. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 41 Assigns an Ethernet port to an EtherChannel group, or enables an channel-group EtherChannel mode, or both. Configures the port priority for the Link Aggregation Control Protocol lacp port-priority (LACP). Displays LACP channel-group information. show lacp Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 42: Pagp Learn-Method

    We also recommend that you set the load-distribution method based on the source MAC address by using the port-channel load-balance src-mac global configuration command. Use the pagp learn-method interface configuration command only in this situation. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 43 Related Commands Command Description Selects a port over which all traffic through the EtherChannel is sent. pagp port-priority Displays Port Aggregation Protocol (PAgP) channel-group information. show pagp Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 44: Pagp Port-Priority

    Controller(config-if)# pagp port-priority 200 You can verify your setting by entering the show running-config privileged EXEC command or the show pagp channel-group-number internal privileged EXEC command. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 45 Provides the ability to learn the source address of incoming packets. pagp learn-method Sets the load-distribution method among the ports in the EtherChannel. port-channel load-balance Displays Port Aggregation Protocol (PAgP) channel-group information. show pagp Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 46: Port-Channel Load-Balance

    Specifies load distribution based on the source host IP address and TCP/UDP src-mixed-ip-port (Layer 4) port number. Specifies load distribution based on the TCP/UDP (Layer 4) port number. src-port Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 47 You can verify your setting by entering the show running-config privileged EXEC command or the show etherchannel load-balance privileged EXEC command. Examples This example shows how to set the load-distribution method to dst-mac: Controller(config)# port-channel load-balance dst-mac Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 48: Port-Channel Load-Balance Extended

    (Optional) Specifies load distribution based on the TCP/UDP (Layer 4) port number. Command Default The default is src-mac. Command Modes Global configuration Command History Release Modification Cisco IOS XE 3.2SE This command was introduced. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 49 Usage Guidelines For information about when to use these forwarding methods, see the Layer 2 Configuration Guide (Cisco WLC 5700 Series) for this release. You can verify your setting by entering the show running-config privileged EXEC command or the show etherchannel load-balance privileged EXEC command.

  • Page 50: Port-Channel Min-Links

    This example shows how to specify a minimum of three active LACP ports before port channel 2 becomes active: Controller(config)# interface port-channel 2 Controller(config-if)# port-channel min-links 3 Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 51 Layer 2/3 Commands port-channel min-links Related Commands Command Description Specifies the maximum number of LACP ports allowed in a port lacp max-bundle channel. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 52: Show Etherchannel

    This is an example of output from the show etherchannel channel-group-number detail command: Controller> show etherchannel 1 detail Group state = L2 Ports: 2 Maxports = 16 Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 53 Logical slot/port = 10/1 Number of ports = 2 Logical slot/port = 10/1 Number of ports = 2 Port state = Port-channel Ag-Inuse Protocol = LACP Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 54 Assigns an Ethernet port to an EtherChannel group, or enables an channel-group EtherChannel mode, or both. Restricts the protocol used on a port to manage channeling. channel-protocol Accesses or creates a port channel. interface port-channel Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 55: Show Lacp

    Controller> show lacp counters LACPDUs Marker Marker Response LACPDUs Port Sent Recv Sent Recv Sent Recv Pkts --------------------------------------------------------------------- Channel group:1 Gi2/0/1 Gi2/0/2 Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 56 Oper Port Port Port Flags State Priority Number State Gi2/0/1 bndl 32768 0x3D Gi2/0/2 bndl 32768 0x3D The following table describes the fields in the display: Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 57 Oper Key Runtime operational key that is being used by this port. LACP automatically generates this value as a hexadecimal number. Port Number Port number. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 58 The system identification is made up of the system priority and the system MAC address. The first two bytes are the system priority, and the last six bytes are the globally administered individual MAC address associated to the system. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 59 Clears the LACP channel-group information. clear lacp Configures the port priority for the Link Aggregation Control Protocol lacp port-priority (LACP). Configures the LACP system priority. lacp system-priority Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 60: Show Pagp

    Gi1/0/2 This is an example of output from the show pagp dual-active command: Controller> show pagp dual-active PAgP dual-active detection enabled: Yes PAgP dual-active version: 1.1 Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 61 Flags Cap. Gi1/0/1 controller-p2 0002.4b29.4600 Gi01//1 9s SC 10001 Gi1/0/2 controller-p2 0002.4b29.4600 Gi1/0/2 24s SC 10001 Related Commands Command Description Clears PAgP channel-group information. clear pagp Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 62: Show Platform Etherchannel

    Use this command only when you are working directly with a technical support representative while troubleshooting a problem. Do not use this command unless a technical support representative asks you to do so. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 63: Show Platform Pm

    Use this command only when you are working directly with your technical support representative while troubleshooting a problem. Do not use this command unless your technical support representative asks you to do so. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 64: Show Udld

    The range is from 1 to 4095. interface-id (Optional) ID of the interface and port number. Valid interfaces include physical ports, VLANs, and port channels. neighbors (Optional) Displays neighbor information only. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 65 Otherwise, the enable operational setting depends on the global enable setting. Port enable operational state Operational state that shows whether UDLD is actually running on this port. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 66 The port number ID of the neighbor from which the echo originated. Message interval The rate, in seconds, at which the neighbor is sending advertisement messages. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 67 Resets all interfaces shut down by UDLD and permits traffic to pass through again. udld reset Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 68: Switchport

    Layer 2 port. Then you can enter the switchport access vlan and switchport mode commands. The switchport command is not used on platforms that do not support Cisco-routed ports. All physical ports on such platforms are assumed to be Layer 2-switched interfaces.
  • Page 69 Layer 2/3 Commands switchport Examples This example shows how to cause an interface to cease operating as a Layer 2 port and become a Cisco-routed port: Controller(config-if)# no switchport This example shows how to cause the port interface to cease operating as a Cisco-routed port and convert to...

  • Page 70: Switchport Access Vlan

    VLAN 2 instead of the default VLAN: Controller(config-if)# switchport access vlan 2 Related Commands Command Description Configures the VLAN membership mode of a port. switchport mode Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 71: Switchport Mode

    A configuration that uses the access,or trunk keywords takes effect only when you configure the port in the appropriate mode by using the switchport mode command. The static-access and trunk configuration are saved, but only one configuration is active at a time. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 72 Controller(config)# interface gigabitethernet2/0/1 Controller(config-if)# switchport mode dynamic desirable This example shows how to configure a port for trunk mode: Controller(config)# interface gigabitethernet2/0/1 Controller(config-if)# switchport mode trunk Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 73 Layer 2/3 Commands switchport mode Related Commands Command Description Configures a port as a static-access port. switchport access vlan Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 74: Switchport Nonegotiate

    This example shows how to cause a port to refrain from negotiating trunking mode and to act as a trunk or access port (depending on the mode set): Controller(config)# interface gigabitethernet2/0/1 Controller(config-if)# switchport nonegotiate Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 75 You can verify your setting by entering the show interfaces interface-id switchport privileged EXEC command. Related Commands Command Description Configures the VLAN membership mode of a port. switchport mode Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 76: Udld

    You can use these commands to reset an interface shut down by UDLD: • The udld reset privileged EXEC command to reset all interfaces shut down by UDLD. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 77 Resets all interfaces shut down by UDLD and permits traffic to pass through udld reset again. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 78: Udld Port

    You can use these commands to reset an interface shut down by UDLD: • The udld reset privileged EXEC command resets all interfaces shut down by UDLD. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 79 Enables aggressive or normal mode in UDLD or sets the configurable message udld timer time. Resets all interfaces shut down by UDLD and permits traffic to pass through udld reset again. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...

  • Page 80: Udld Reset

    Enables aggressive or normal mode in UDLD or sets the configurable message udld timer time. Enables UDLD on an individual interface or prevents a fiber-optic interface from udld port being enabled by the udld global configuration command. Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01...
  • Page 81 Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) OL-32323-01 IN-1...
  • Page 82 Index Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series) IN-2 OL-32323-01...

Table of Contents