Redundancy - Cisco WLC 5700 Series Command Reference Manual

redundancy

redundancy
To enter redundancy configuration mode, use the redundancy command in global configuration mode.
redundancy
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Global configuration
Command History
Release
Cisco IOS XE 3.2SE
Usage Guidelines
The redundancy configuration mode is used to enter the main CPU submode, which is used to enable the
standby switch.
To enter the main CPU submode, use the main-cpu command while in redundancy configuration mode.
From the main CPU submode, use the standby console enable command to enable the standby switch.
Use the exit command to exit redundancy configuration mode.
Examples This example shows how to enter redundancy configuration mode:
Controller(config)# redundancy
Controller(config-red)#
This example shows how to enter the main CPU submode:
Controller(config)# redundancy
Controller(config-red)# main-cpu
Controller(config-r-mc)#
High Availability Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
16
Modification
This command was introduced.
High Availability Commands
OL-32317-01