Graco Reactor E-10 Instructions-Parts List Manual page 21

7. Set function knob to Slow Recirc
Recirc .
Fast Recirc
311075ZAB
or Fast
Slow Recirc
8. When clean fluids exit both recirculation tubes (P),
set function knob to Park
9. Replace the recirculation tubes in the supply tanks.
10. On non-heated units, purge the hoses through the
gun without a static mixer installed.
NOTE: For heated units, continue with Startup of
Heated Units, page 22.
For non-heated units, continue with
Spraying/Dispensing, page 25.
Installation
.
21