Siemens SITRANS TH100 Operating Instructions Manual page 111

①
②
③
Figure 7-6
For parameters with an associated unit, the parameter name and unit are displayed as
alternating values in
See also
Disabling button lock (Page 158)
Changing parameter values
Requirement
The button lock is disabled. (Page 158)
The write protection switch is disabled. (Page 113)
User PIN is disabled. (Page 155)
Procedure
1. Navigate to the parameter view (Page 107).
2. Select the desired parameter with the
Use the
You are in the edit view.
3. Change the parameter value with the
To navigate faster, keep the
4. Save the change with the
Or, cancel the change with the
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
Operating Instructions, 05/2020, A5E41864807-AB
Name of parameter and, if availa‐
ble, unit (alternating)
Enumeration arrows (for enumera‐
tions only)
Parameter ID
Example of edit view
①
. Example: Lower range value in °C.
button to confirm.
④
"EDIT" symbol (flashing)
⑤
Parameter value
or button.
or button.
or button pressed.
button.
button.
Operating (SITRANS TF)
7.1 Local operation
111