8.2.3.5 Analoges Ausgangsmodul
Funktion
Mit dem analogen Ausgangsmodul lassen sich analoge Messwerte
ausgeben, die z. B. mit Hilfe von Drehspulinstrumenten an der
Schaltschranktür angezeigt werden können. Es stehen insgesamt
4 Ausgänge zur Verfügung.
Für das Ausgangssignal sind zwei unterschiedliche Formate wählbar:
- 4 ... 20 mA, Ausgabe über Messerleiste X5
- 0 ... 10 V, Ausgabe über Messerleiste X4.
Montage
→ (Seite 8-104)
Anschluss
→
Verbindungsaufbau
Es können maximal 2 analoge Ausgangsmodule angeschlossen
werden, deren Drehkodierschalter jedoch unterschiedlich einge-
stellt sein müssen (Modul 1 bzw. Modul 2).
Anschlussbelegung
3ZW1012-0WL11-0AB1
(Seite 8-104)
8.2.3.5 Analog output module
Function
With the analog output module, analog measured-values can be
transmitted, which can be shown on the cubicle door by means of
moving-coil instruments. A total of 4 outputs is available.
For the output signal, two different formats can be selected:
- 4 ... 20 mA, output via receptacle X5
- 0 ... 10 V, output via receptacle X4
Installation
→ (page 8-104)
Connection
→
Connection setup
A maximum of 2 analog output modules can be connected; the
rotary coding switches of these modules must, however, have diffe-
rent settings (module 1/module 2).
Terminal assignment
(page 8-104)
8 – 115