Toa TS-D1000 Series Instruction Manual page 9

(3) Chairman Unit
Name
C Priority Speech
D Priority Chime
(4) Monitor Speaker of Conference Unit
Name
E Volume
F Unit in use
Set operating mode when Priority speech is enabled at the Chairman unit.
Selection:
Factory default setting: PTT
Tip
PTT and ALT mode operations are as follows:
PTT: Unit can only speak while its Priority speech key is pressed.
ALT: Unit can speak when its Priority speech key is pressed, and terminate
Priority speech when pressed again.
Set whether to enable a single-tone chime when the Priority speech key is
pressed at the Chairman unit.
Selection:
Factory default setting: ON
Globally set the output sound volume for all Conference unit monitor
speakers.
Selection:
Factory default setting: 0 dB
Tip
During speech, the volume of the Conference unit monitor speaker
attenuates to make it easier for the user to speak.
Set whether to enable (ON) or mute (OFF) the monitor speaker of the
Conference unit in use.
Selection:
Factory default setting: ON
Tip
Set the monitor speaker to OFF if feedback (howling) is experienced.
Contents
PTT/ALT
ON (chime tone)/OFF (silent)
Contents
−20 dB to 8 dB (2 dB steps)/Mute
ON (enabled)/OFF (mute)
9