Kyocera Fax System 10 Operation Manual page 226

Internet Faxing (i-FAX) > i-FAX Settings
i-FAX Settings TX/RX
SMTP
Item
i-FAX Protocol
SMTP Server Name
SMTP Port Number
SMTP Server Timeout
Authentication Protocol
POP before SMTP
Timeout
Connection Test
Domain Restriction
*1, *2
Display whether an i-FAX connection is available or
not. Configure i-FAX in [i-FAX (SMTP & POP3)] on
the Protocol Settings page.
*2
Enter the SMTP server name or SMTP server IP
address. You can enter up to 64 characters.
If you enter the server name, you must specify the IP
address of the DNS server. You can enter the DNS
server IP address in the TCP/IP settings screen.
Machine's Operation Guide
Set the port number used by SMTP. Normally, 25 is
used.
Enter the timeout period in seconds.
Specify whether SMTP authentication will be used or
whether [POP before SMTP] will be used.
If you selected [POP before SMTP] in the
authentication setting, specify the timeout period in
seconds.
Tests to confirm that the settings on this page are
correct. When the [Test] button is clicked, this
machine tries to connect to the SMTP server.
Activate or deactivate to restrict domains. Click the
[Domain List] button to configure. Enter a domain
name that is permitted or rejected. You can also
specify the E-mail addresses.
10-7
Description