Part Names And Functions; Machine - Kyocera Fax System 10 Operation Manual

Before Using the Fax Machine > Part Names and Functions

Part Names and Functions

Machine

This chapter explains the names of parts when the machine is used as a fax machine. For the parts required when
functions other than FAX are used, refer to the following:
Machine's Operation Guide
1
2
1 Operation panel
2 Power switch
3 MP (Multipurpose) tray
4 LINE connector (L2)
5 LINE connector (L1)
6 TEL connector (T1)
IMPORTANT
You cannot automatically receive a fax when the power switch is turned off.
4
5
6
3
Perform the fax operation with this panel.
Set this switch to the ON side when performing the fax or copier operation. The
touch panel lights to enable operation.
Set the paper in this tray when using a type of paper other than the cassette
(e.g., when using special paper).
If you install 2 optional FAX Kits (Dual FAX option), you can use Port 2. Connect
the modular cord for the telephone line to this connector.
Connect the modular cord for the telephone line to this connector. This
connector is Port 1.
When using a commercially available telephone set, connect the modular cord
to this connector.
2-2