I-Fax Default Settings - Kyocera Fax System 10 Operation Manual

Internet Faxing (i-FAX) > i-FAX Settings

i-FAX Default Settings

Function Settings > FAX / i-FAX
Use this page to enable the internet faxing.
The settings available on the page are shown below.
Common Transmission
Settings
Reception
FAX Settings
Item
Local FAX Name
TTI
TTI Position
Account as Local FAX
Name
Retry Times
Media Type
Use MP Tray
FAX Exclusive Paper
Source
Receive Date/Time
Duplex Printing
2in1 Printing
Enter the local fax name.
Selects On or Off whether to send the TTI (Transmit
Terminal Identifier) information to the other party.
Selects the position of the TTI to be printed on the
transmitted documents.
Set to On to use the account name as the local FAX
name. The account name appears in place of the
local FAX name.
Specify the number of redials.
Sets the media type for printing the received
documents.
Selects whether or not to include the MP
(multipurpose) tray for auto media selection when
printing received documents. When turned [On], the
MP tray will be included as an option for auto media
selection, and when turned [Off], only the cassettes
will be selected.
Set fax exclusive paper cassettes.
Selects [On] or [Off] whether to print the reception
information such as the received date, the received
time, the transmitting party's information and the
number of transmitted pages on the top of the
received documents.
Specifies whether or not to use the Duplex mode.
Enables or disables 2 in1 reception.
Configure settings for FAX.
Command Center RX User Guide
10-6
Description