Door Assembly - Vulcan-Hart VHU Series Service Manual

VHU INSULATED HUMIDIFIED CABINETS - REMOVAL AND REPLACEMENT OF PARTS
Fig. 20
5. Release grommets from top panel.
Fig. 21
6. Pull wire harness out.
7. Reverse steps to install.
Position grommets correctly during
installation so they retain moisture from escaping.
8. Verify proper operation.

DOOR ASSEMBLY

1. Remove door hinge covers (1, Fig. 22) from lower
and upper door hinge.
F45642 (0217)
removing hinges.
2. Remove door hinge inside mounting screws
from lower door hinge first.
3. Remove door hinge inside mounting screws from
upper door hinge while supporting door weight.
4. Lift door assembly from cabinet.
5. Reverse procedure to install.
6. Check for proper operation.
Page 10 of 16
Fig. 22
Remain in control of door when
Fig. 23