Part Identification Chart - Weider WESY47330 User Manual

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
M6 Nylon Locknut (102)
M8 Nylon Locknut (87)
M10 Nylon Locknut (101)
M12 Nut (58)
M4 Washer (104)
M8 Washer (100)
M10 Washer (99)
50mm Washer (95)
M10 x 65mm Carriage Bolt (88)
M10 x 68mm Bolt (84)
M10 x 65mm Bolt (80)
M10 x 50mm Bolt (81)
M10 x 45mm Bolt (51)
M6 x 35mm Bolt (83)
M4 x 25mm Self-
tapping Screw (103)
M6 x 16mm Bolt (89)
M8 x 15mm Bolt (97)
M4 x 15mm Self-
tapping Screw (107)