Weider WESY2966.0 User Manual page 12

17. Attach the Seat (31) and the Seat Plate (84) to
the Seat Frame (8) with two M6 x 87mm
Screws (73) and two M6 Washers (60).
Attach the Bumper (36) to the Seat Frame (8)
with an M4 x 16mm Screw (61).
Slide the Pad Tube (35) into the Seat Frame
(8).
18. Grease the barrel of an M10 x 51mm Bolt Set
(75). Attach the Leg Lever (9) with the Bolt Set.
Do not overtighten the Bolt Set; the Leg
Lever must be able to pivot easily.
19. Slide four Foam Pads (32) onto the Pad Tube
(35) and the Leg Lever (9). Press a 19mm
Round Inner Cap (33) into each Foam Pad.
20. Set the Seat Frame (8) onto the Upright Base
(5) as shown.
21. Make sure that all parts have been properly
tightened. The use of the remaining parts will be
explained in ADJUSTMENTS, beginning on the
next page.
17
Wide End
84
35
36
61
18
75
9
19
32
33
32
9
20
8
12
31
8
60
73
8
Grease
75
32
35 33
32
33
5