Video Adapter Cards - IBM Aptiva Hardware Handbook

Table 12: Adapter card configurations
Adapter card or cards
currently installed:
None
Plug and Play
Non–Plug and Play
Both Plug and Play and
Non–Plug and Play

Video Adapter Cards

When you install a video adapter card you do not need
to reset (move) jumpers on the system board. The built-
in video controller will be disabled automatically.
However, you may need to set jumpers on the video
adapter card. Check the users guide that came with the
card to see if any jumpers need to be set.
Adapter card you
Action:
are installing:
Plug and Play Do not change any settings.
Non–Plug and Play Do not change any settings.
Plug and Play Do not change any settings.
Non–Plug and Play Change settings in the Plug and Play Setup Utility before installing the card. For
instructions on changing the Plug and Play Setup Utility, see the Aptiva Index.
Plug and Play Change settings in the Plug and Play Setup Utility before installing the card. For
instructions on changing the Plug and Play Setup Utility, see the Aptiva Index.
Non–Plug and Play Do not change any settings.
Plug and Play Do not change any settings.
Non–Plug and Play Change settings in the Plug and Play Setup Utility before installing the card. For
instructions on changing the Plug and Play Setup Utility, see the Aptiva Index.
Preparing to install adapter cards 111