Setting The Print Area Using The Center Of The Print Area As The Base Position - Roland VersaUV LEF2-300 User Manual

Setting the Print Area Using the Center of the Print Area as the Base Position

1.
Set the machine so that the print area is set each time before setting up the
media.
Prevent printing in the incorrect position by specifying the print area before setting up the object to be printed on.
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
3.
Press [▶] twice to display the screen shown below.
SET AT SETUP
ENABLE DISABLE
4.
Press [▲] or [▼] to select "ENABLE".
SET AT SETUP
DISABLE ENABLE
5.
Press [ENTER] to confirm your entry.
6.
Press [◀].
Print Area Settings
1. Optimizing the Setup Method
81