Preventing Ink Discharge Defects
Preventing Primer Dot Drop-out
This cleaning prevents dot drop-out for printers equipped with primer. When data that includes primer or white is
printed, cleaning is performed if the time that has elapsed since the last cleaning operation exceeds the set time.
This cleaning function can only be used when you are using primer (the ink type is ECO-UV4 CMYKPrGlWW).
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
3.
Press [▶].
4.
Press [▼] several times to display the screen shown below.
SUB MENU
PRIMER CL.
5.
Press [▶].
PRIMER CL.
NONE
6.
Press [▲] or [▼] to select an item.
PRIMER CL.
"PAGE"
10 to 360 "MIN"
"NONE"
(Default settings)
7.
Press [ENTER] to confirm your entry.
8.
Press [MENU], then [◀] to go back to the original screen.
96
2. Optimizing the Printing Quality
30min
Automatic cleaning is performed each time prior to the start of printing.
If the time that has elapsed since the last cleaning operation exceeds the set time, clean-
ing will be performed before printing starts. You can set the value in units of 10 minutes
from 10 minutes to 360 minutes.
Cleaning is not performed prior to the start of printing.
Explanation