10-Second Switch Off - Teledyne GMI PS200 User Manual

4.4.1. 10-Second Switch Off

The monitor must be returned to clean air.
NOTE: To avoid accidental switch-off in this dangerous state, the off cycle is
increased to 10 seconds.
Switch OFF by pressing and holding both L and R buttons. A timer counts down from 10 seconds
to 0, and the message GET OUT alternates with HIGH GAS, as shown in
HIGH GAS Timer.
64171
Revision 12.1
Figure 27: Over Range Alarm
Figure 28: GET OUT/HIGH GAS Timer
PS200
PORTABLE GAS MONITOR
Figure 28: GET OUT/
21