Figure 14: Connect an ACX710 Router to a Management Console Through a Console Server
CON
To Console Port
Figure 15: Connect an ACX710 Router Directly to a Management Console
Step 6: Perform Initial Software Configuration
IN THIS SECTION
Enter Configuration Mode | 12
Configure User Accounts and Passwords | 13
Configure System Attributes | 13
Commit the Configuration | 15
This procedure connects the router to the network but does not enable it to forward traffic. For complete information
about configuring the router to forward traffic, including examples, see the Junos OS configuration guides.
To configure the software:
Enter Configuration Mode
1. Verify that the router is powered on.
2. Log in as the root user. There is no password.
Console Server
CON
To Console Port
PC
Laptop CPU
12