Step 4: Connect To Power - Juniper ACX710 Quick Start Manual

Figure 9: Connect the Grounding Cable to the ACX710 Router
6. Secure the grounding cable lug with the screws.
7. Dress the grounding cable, and verify that it does not touch or block access to router components, and that it does
not drape where people could trip on it.

Step 4: Connect to Power

The ACX710 router supports a dual feed DC power supply module.
ACX710 routers. For the 2-pole DC circuit breaker, the recommended maximum value is 32 A and the minimum value is
8 A.
Table 2: DC Power Specifications for ACX710 Routers
Item
Nominal input voltage
Input voltage range
Maximum current
Typical power consumption
Maximum power consumption
Before you begin connecting DC power to the router:
Ensure that you have taken the necessary precautions to prevent electrostatic discharge (ESD) damage (see Prevention
of Electrostatic Discharge Damage).
Ensure that you have connected the router chassis to earth ground.
Table 2 describes the DC power specifications for
Specifications
-48 V DC
-38 V DC to -60 V DC
6 A
150 W
225 W
8