Advertisement
Related
Commands
set as-path
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
set automatic-tag
c e s
Syntax
Defaults
Command Modes
Command
History
278
|
Access Control Lists (ACL)
Prior to 7.8.1.0, names are up to 16 characters long.
show config
Display the current configuration.
Configure a filter to modify the AS path for BGP routes.
set as-path prepend as-number [... as-number]
prepend as-number
Not configured
ROUTE-MAP
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.6.1.0
Support added for S-Series
Version 7.5.1.0
Support added for C-Series
pre-Version 6.1.1.0
Introduced for E-Series
You can prepend up to eight AS numbers to a BGP route.
This command influences best path selection in BGP by inserting a tag or AS number into the
AS_PATH attribute.
match as-path
ip as-path access-list
neighbor filter-list
show ip community-lists
Configure a filter to automatically compute the tag value of the route.
set automatic-tag
To return to the default, enter no set automatic-tag.
Not configured.
ROUTE-MAP
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.6.1.0
Support added for S-Series
prepend
Enter the keyword
inserted into the BGP path information.
Range: 1 to 65535
Redistribute routes that match an AS-PATH attribute.
Configure an AS-PATH access list.
Configure a BGP filter based on the AS-PATH attribute.
Display configured IP Community access lists.
followed by up to eight AS numbers to be
Advertisement
