Control Panel (Exposed) - Graco SaniForce SDU Series Manual

Installation
Control Panel Panel (Exposed) (Exposed)
Control Control Panel (Exposed)
When supplied with a continuous supply of air, the
control panel can control the SDU functions for
manual unloading of drums.
NOTE: An SDU that uses a static seal will not have
NOTE: NOTE:
inflatable seal components on the control panel.
AA Main air slider valve
AB Ram air regulator
Ram air pressure gauge
AC
AD Ram director valve
AE Air motor regulator
AF air motor pressure gauge
AG Air assist button
AH Air motor slider valve
AJ Seal air pressure regulator
AK
Seal air pressure gauge
AL Seal inflate switch
AM Pressure relief valve
10
Turns air on and off to the system. When closed, the valve relieves
pressure downstream.
Controls ram up and down pressure and air assist pressure.
Displays the air pressure used to raise and lower the ram.
Controls ram direction.
Controls air pressure to the motor.
Displays the air pressure used to drive the air motor.
Turns air on and off to push the ram plate out of an empty drum.
Turns air on and off to the air motor. When closed, the valve relieves
air trapped between it and the air motor. Push the valve to shutoff.
Controls the air pressure used to inflate the seal.
Displays the air pressure used to inflate the seal.
Controls when air is applied to the seal.
Prevents overpressurization of the seal.
3A5402J