System Configuration Screen - Graco SaniForce SDU Series Manual

System Configuration Configuration Screen
System System Configuration
The system configuration screen defines the
SDU parameters. The system settings can be
exported to a USB device and viewed or edited
on a PC, then imported back into the system. See
Import and Export with USB, page
Icon/Field
Icon/Field Icon/Field
3A5402J
Electro-pneumatic Control Panel Display Screens
Screen
Screen
61.
Description
Description Description
Import USB Import Import USB USB
Import the system settings from a USB device.
Export Export USB Export USB USB
Export the system settings to a USB device.
Shutdown/Depressurize Shutdown/Depressurize Shutdown/Depressurize
Press to vent pressure from the system. If the ram is raised and not
locked or held in place, it will move down as venting occurs. When done,
an acknowledge message appears and requires user response.
Shutdown Time Time
Shutdown Shutdown Time
Shutdown Time, in seconds. Enter the amount of time to allow for system
depressurization. If the system has not been depressurized by the time
the specified time has elapsed, an alarm will be generated.
Screen Settings Settings
Screen Screen Settings
Press to show the screen settings window. Use the window to set the
screen brightness, dim time, screen saver time, touch calibration, and
briefly block touches to clean the touch screen.
47