Cisco NCS 4216 Installing Instruction page 21

Hide thumbs Also See for NCS 4216:

Installing the Cisco NCS 4216

SUMMARY STEPS

1. Using a No. 2 Phillips screwdriver or your fingers, loosen the captive installation screw that secures the

fan tray to the chassis. The following figure shows the front of the fan tray, including the captive installation

screws.

2. Grasp the fan tray handle with one hand and the outside of the chassis with the other hand. The figure

above shows the front of the fan tray, including the handle.

3. Pull the fan tray toward you no more than 1 inch to disengage it from the power receptacle on the midplane,

as shown in the following figure.

Removing and Replacing the Fan Tray

Cisco NCS 4216 Hardware Installation Guide

Table of Contents